Instrument Stands from Cal Coast Ophthalmic Instruments |
 |
 |
Ophthalmic instrument stand with textured finish
The Model 7720 is designed for functional and aesthetic compatibility with any Reliance examination chair. Its sleek, contoured design offers maximum access to patients and features a textured finish. The unit is offered both with (7720-IC) and without (7720-NC) an instrument console. Both models include a tray area on top of the column, a heavy duty scuff pad on the front of the base casting, and chair controls. |
Reliance 7720 Stand |
 |
| * Counterbalanced Slit Lamp Arm - A mechanical locking mechanism located underneath the slit lamp arm enables you to adjust its height with a single hand. It can be counterbalanced for instruments weighing between 12 and 60 pounds. A switch to raise and lower the chair is available on the slit lamp arm as an option. |
| * Upper (Refractor) Arm - The refractor arm has a 10" range of vertical travel and accommodates instruments weighing up to 20 pounds. It can be positioned on support column at the desired height. A third instrument arm with a 20- to 50-pound capacity is offered as an option. Its vertical travel is 10". A hanger can be provided for an indirect ophthalmoscope. |
| * Instrument Wells (IC Only)- The Model 7720-IC is equipped with three instrument wellss which accommodate rechargeable Welch Allyn instruments. A fourth well is available as an option. |
| * Convenient controls switches - Located on the instrument console enable you to turn a chart projector on and off, and to raise and lower your Reliance examination chair, and automatically return it to its seated position. Rheostats control the overhead lamp and the binding posts typically used for the indirect ophthalmoscope. |
| * Halogen Overhead Lamp - A standard overhead arm on the Model 7720 is equipped with a long-lasting halogen bulb. It provides a bright, direct light source for minor procedures. Low voltage is safer, and the arm adjusts without the need for tools. |
| * Dimensions and Specifications- Shipping weight: 292 lbs. Height to top of console: 36". Height to top of pole: 71". Base: 21" x 21". Electrical: 115 volts, 60Hz, 3 amperes, U.L. Approved |
| * Textured Finish- Tough, textured epoxy finishes are offered in four standard colors. Special colors are available at an additional cost. Contact your dealer or call Reliance at 1-800-735-0357 for a color selection card. |
| * Model 7725- The Model 7725 is the ideal choice for practitioners who only require a slit lamp arm on an instrument stand. This unit has the same sturdy construction and features as the 7720 instrument stand without a refractor arm, lamp and pole. Available with (7725-IC) or without (7725-NC) an instrument console. |
| * Wheelchair Access (optional)- An optional extended refractor arm and modified lower slit lamp arm deliver instruments to patients in any model of wheelchair. When ordered with this options, the cost may be applied toward the ADA tax credit. |
| * Eclipse Room Light Control (optional)- An infrared system controls all room lighting through instrument moves or console switches. Available as an option on all Reliance low voltage stands. |
 |
| Back to main Stands Page |
