Power Motion Joystick

​

The RC-5000 is equipped with the latest available joystick technology on the market. Five power motion modes ensure a precise and silent movement of the unit in all directions. You have the choice between rough or fine adjustment towards the patient eye.

 

Color Touch Screen

​

The 5.7 inch colour touch screen is used as operating monitor as well as for displaying all measured values. You can move the unit in all directions by simply touching the screen. All commands can be done via touch screen.

 

Auto Alignment + Auto Shot

​

Handling the RC-5000 is very easy – it does almost everything by itself. Alignment and measurement are done automatically. You just roughly align the system towards the patient eye and the rest is taken care of by the instrument. With a finger tip on the screen the system automatically moves to measure the other (left or right) eye.

 

Pupil + Corneal Measurement

​

Once you have captured the patients eye you can set the pupil and cornea measurement bars to individual diameters. These values will also be stored, displayed and printed. The RC-5000 acquires the data even in combined mode (refraction and keratometry) in less than three seconds. This short examination time makes the unit as cost and time effective as possible.

 

Central + Peripheral K-Values

​

The RC-5000 provides you with central (ø 3 mm) and peripheral (ø 6mm) keratometer readings measured at one time within a second. You can take these readings from cornea or the back surfaces of a RGP contact lens.

 

Electronic Controlled Chinrest

​

Since all movements of the RC-5000 are electronically controlled,  the chinrest follows your direction by adjusting the patient up or down by pressing a button. For mounting on a refraction unit you can easy disassemble the chinrest from the main body.